Contact phone address of Shijingshan isolation suit
Technical requirements for nursing pad sheet: 1 - Product model/specification and its classification description 1.1 Medical nursing pads are divided into I type non-woven fabric, II type non-woven fabric plus plastic film, III type toilet paper plus plastic film, and IV type non-woven fabric and plastic film with toilet paper sandwiched between them for sewing or pressing thickening and water absorption. 1.2 Medical nursing pads can be divided into: Type A: maternity pad; Type B: medium order; Type C: bed sheet; Type D: hole towel; Type E: quilt cover; Type F: pillowcase. Specification and model of medical nursing pad Unit: cm2 Performance index 2.1 See Table 1 for the specification and model of medical nursing pad. 2.2 The appearance of medical care pad shall be flat without obvious defects, stains, damages, abnormal smell and foreign matters. 2.3 The sewing or heat sealing medical care pad shall be firmly sewn, and shall not be disconnected or skipped. The sewing thread density shall not be less than 8 stitches/3cm, and the sewing edge distance shall not be less than 0.3cm. In case of heat sealing, it shall be firm without cracking. 2.4 Tightness plus film medical care pad, the film part shall not be permeable. 2.5 The medical care pad shall meet the health standards, with the total bacterial count ≤ 200 cfu/g, the total fungal count ≤ 100 cfu/g, coliform bacteria shall not be detected, and pathogenic pyogenic bacteria shall not be detected. 3 Test method 3.1 The basic dimensions measured with ordinary tape or steel ruler shall meet the requirements of 2.1. 3.2 Appearance, hand feeling and visual sensory inspection shall meet the requirements of 2.2. 3.3 The measurement with steel ruler for sewing shall comply with the provisions of 2.3. 3.4 Pour water on the pressed suture and the coating part. After 1 minute, there is no water mark on the reverse side. Put the sealed small package at the bottom of the container with the water height of 0.5 m, and slowly move it up to the water surface for a moment. Whether there is blister should comply with the provisions of 2.4. 3.5 Hygienic requirements shall be inspected according to the hygienic standards for disposable sanitary articles, and the results shall meet the provisions of Article 2.5.
Contact phone address of Shijingshan isolation suit
Dressing skills of degreasing gauze bandages: what skills do medical staff have when dressing wounds for patients? We can learn something, so that we can also make simple treatment in case of emergency, alleviate the pain and bleeding symptoms of patients, and buy time for medical assistance. Medical gauze wholesale manufacturers briefly introduce the dressing skills. Degreasing gauze bandage 1. The patient's body position should be appropriate, and the affected limb should be placed in an appropriate position. The patient should lie flat to avoid dressing in a narrow space. During the dressing process, the patient's limb should be comfortable and pain should be reduced. 2. The affected limb should be bound at the functional position to avoid pain caused by the patient's self movement. 3. The bandage should start from the inside out, from the distal end to the torso. At the beginning of the bandage, two circular bandages must be made to fix the bandage. 4. The bandage roll shall be grasped during dressing to avoid falling. The bandage roll must be applied flat to the binding part. 5. The pressure of dressing should be equal every week and should not be too light to avoid falling off. It should not be too tight to avoid blood circulation disorder. 6. Except for patients with acute bleeding, open wound or fracture, the local area must be clean and dry before dressing. 7. Metal foreign matters such as rings, gold chain bracelets and watch necklaces should be removed before binding to avoid affecting the binding effect. Degreasing gauze bandage is not uncommon in daily life. It can help patients fix the affected area, and then it can also be bandaged to stop bleeding. Degreasing gauze bandage has a very wide range of use, so the types of degreasing gauze bandage are also very sound and extensive. Let's talk about it briefly below. Degreasing gauze bandages: With the rapid development of human civilization and material life, medical textiles have also been developed rapidly in today's society. The varieties of medical textiles are also constantly innovating, medical consumables are constantly emerging, and they are constantly expanding in the medical field. The design concept has also been constantly extended and developed. Degreasing gauze bandages can be divided into simple bandages, non elastic or elastic bandages, light support bandages, stress bandages and orthopedic bandages. The material of simple bandage is composed of cotton, viscose rayon and polyamide fiber, and the manufacturing method is generally weaving and knitting. The material of non elastic bandage/elastic bandage is made of elastic yarn. The manufacturing method is different from other bandage manufacturing methods, and it is not woven. The material of light support bandage is composed of cotton, viscose rayon and elastic yarn, and the manufacturing method is knitting and weaving. The material of the stress bandage is composed of cotton, polyamide fiber and elastic yarn, and the manufacturing method is also woven or knitted. Orthopedic bandages are more complex. The materials are composed of cotton, viscose rayon, polyamide fiber, polypropylene fiber and polyurethane foam. The manufacturing methods also combine all the above methods, including knitting, organic weaving and nonwovens.
Contact phone address of Shijingshan isolation suit
Appearance of medical isolation shoe cover: 1. The medical isolation shoe cover should be free of mold, and the surface should be free of impurities, adhesion, cracks, damage and other defects; 2. If the medical isolation shoe covers are sewn, the sewn parts should be firm, neatly formed, the needle size should be even and straight, and there should be no defects such as needle skipping and missing stitches. If the heat seal is applied, the heat seal parts should be firm, neatly formed, flat and free of cracks; 3. The sewing needle distance shall not be less than 6 stitches every 40mm. 4. Specification and size: the specification and size of the medical isolation shoe cover should conform to the size of the packaging bag logo, with a tolerance of ± 10%; 5. Surface moisture resistance: the water level on the outer side of the medical isolation shoe cover shall not be lower than the requirement of Level 2. 6. The breaking strength of type II medical isolation shoe cover shall not be less than 10N in longitudinal direction and 4N in transverse direction. 7 Elongation at break The elongation at break of type I medical isolation shoe cover material shall not be less than 10%. 8. Tensile strength Type I medical isolation shoe cover material tensile strength (longitudinal and transverse) shall not be less than 10Mpa. 9. Elastic belt performance The elongation ratio of elastic belt used for medical isolation shoe covers should be ≤ 1:1.7, and the tensile elastic recovery rate should be ≥ 75%. 10. Quality requirements: The weight of nonwoven cloth used in type II medical isolation shoe covers shall not be less than 15g/m2; The film thickness of type I medical isolation shoe cover shall not be less than 0.01mm.
Contact phone address of Shijingshan isolation suit
What problems should be paid attention to when purchasing medical cotton balls: medical cotton balls are indispensable in medical supplies, and they are also things that contact patients' skin at zero distance, so their hygiene and safety must be very high. Do you know exactly what kind of medical cotton ball is qualified? Let's introduce it to you in detail. 1. When you get the product, you should carefully check its packaging to see if there is any abnormality; 2. Observe the information such as certificate and instruction on the package to see if they are written correctly; 3. General medical cotton balls are subdivided into bacteria and sterile ones, which are marked on the outer package; 4. Remember that products with damaged packaging and impurities in cotton balls are not allowed to be used; 5. In use, you can distinguish the good from the bad according to the amount of water absorption. The water absorption per gram of cotton ball must be more than 25 grams, so that it can play a better role in the use process; 6. Because this product is directly in contact with people's skin, attention should be paid before and after use to avoid environmental pollution.
Contact phone address of Shijingshan isolation suit
What is the difference between medical isolation clothing and protective clothing? GB 19082-2009 [3] stipulates that protective clothing is applicable to provide barrier and protection for medical personnel when they are exposed to potentially infectious patients' blood, body fluid, secretions, particles in the air, etc. The protective clothing consists of hoodies and pants, and can be divided into one-piece structure and split type structure. One piece and split structure. Medical isolation clothing is a kind of protective equipment used by medical personnel to prevent blood, body fluid and other infectious substances from contaminating them, and also to protect patients from infection. Contact with patients with infectious diseases transmitted by contact, such as patients with infectious diseases and patients infected with multidrug resistant bacteria; Protective isolation shall be carried out for patients, such as patients with extensive burns and patients with bone graft; Prevent infection when patients' blood, body fluids, secretions and effluents splash. In a word, medical isolation clothing is used for patients in tight isolation, contact isolation and protective isolation. Medical and nursing protective clothing is a disposable protective equipment worn by medical staff when they are in clinical contact with Class A infectious disease patients or those under the management of Class A infectious diseases. When contacting patients with infectious diseases transmitted by air and droplets, they may be splashed by patients' blood, body fluids, secretions and emissions. But this kind of patient is not very serious, just a general infection.
Contact phone address of Shijingshan isolation suit
Precautions for selecting medical cotton balls: First, go to a regular drugstore to buy them. There are various brands of cleaning cotton balls in the supermarket on the market, and the prices vary a lot. Some people may be greedy for bargains. However, mothers are advised not to covet cheap cotton balls of informal brands. Because there are many inferior cotton balls in the market, the raw materials are made of dirty cotton similar to black cotton after bleaching, and white latex is added to keep the appearance neat. The production site does not meet the hygiene standards at all. Wiping the body with a cotton swab made of inferior raw materials that do not meet the hygiene standards will not clean the body, but may lead to increased disease. So I advise all mothers to go to regular stores to buy trustworthy medical tampons. 2、 Look at the quality of cotton. The cotton ball shall be made of absorbent cotton, and the medical absorbent cotton shall be soft and elastic white fiber, without stain, stain, foreign matter, odor and taste. Pay attention to the whiteness of cotton when purchasing. The whiteness of medical absorbent cotton should not be less than 80 degrees. 3、 Look at the package label. Pay attention to whether the packing is sealed when purchasing cotton balls
