Supplied by Jinjiang isolation clothing manufacturer
Technical requirements for nursing pad sheet: 1 - Product model/specification and its classification description 1.1 Medical nursing pads are divided into I type non-woven fabric, II type non-woven fabric plus plastic film, III type toilet paper plus plastic film, and IV type non-woven fabric and plastic film with toilet paper sandwiched between them for sewing or pressing thickening and water absorption. 1.2 Medical nursing pads can be divided into: Type A: maternity pad; Type B: medium order; Type C: bed sheet; Type D: hole towel; Type E: quilt cover; Type F: pillowcase. Specification and model of medical nursing pad Unit: cm2 Performance index 2.1 See Table 1 for the specification and model of medical nursing pad. 2.2 The appearance of medical care pad shall be flat without obvious defects, stains, damages, abnormal smell and foreign matters. 2.3 The sewing or heat sealing medical care pad shall be firmly sewn, and shall not be disconnected or skipped. The sewing thread density shall not be less than 8 stitches/3cm, and the sewing edge distance shall not be less than 0.3cm. In case of heat sealing, it shall be firm without cracking. 2.4 Tightness plus film medical care pad, the film part shall not be permeable. 2.5 The medical care pad shall meet the health standards, with the total bacterial count ≤ 200 cfu/g, the total fungal count ≤ 100 cfu/g, coliform bacteria shall not be detected, and pathogenic pyogenic bacteria shall not be detected. 3 Test method 3.1 The basic dimensions measured with ordinary tape or steel ruler shall meet the requirements of 2.1. 3.2 Appearance, hand feeling and visual sensory inspection shall meet the requirements of 2.2. 3.3 The measurement with steel ruler for sewing shall comply with the provisions of 2.3. 3.4 Pour water on the pressed suture and the coating part. After 1 minute, there is no water mark on the reverse side. Put the sealed small package at the bottom of the container with the water height of 0.5 m, and slowly move it up to the water surface for a moment. Whether there is blister should comply with the provisions of 2.4. 3.5 Hygienic requirements shall be inspected according to the hygienic standards for disposable sanitary articles, and the results shall meet the provisions of Article 2.5.
Supplied by Jinjiang isolation clothing manufacturer
Usage of medical isolation shoe cover: ① Please select and confirm the size of medical isolation shoe cover before use. ② Tear off the package at the opening and take out the product. ③ The medical isolation shoe cover has reasonable structure and is easy to wear and take off. Precautions: ① Please read the instructions of medical isolation shoe covers carefully before use. ② Please strictly follow the use and use restrictions of medical isolation shoe covers. ③ The medical isolation shoe cover is disposable, and it is strictly prohibited to reuse. After use, please dispose according to the requirements of the Biosafety Prevention Regulations. ④ This product is melted at 135 ℃, please keep away from heat source and open flame when using. ⑤ Please check the product visually before wearing it. If there is damage, discoloration, pollution, etc., please do not wear it. ⑥ It shall not be used after the expiration date of the product. ⑦ Only for health units and emergency rescue, not for operating rooms!
Supplied by Jinjiang isolation clothing manufacturer
What does the degreasing gauze bandage do: it is rarely seen in daily life as medical supplies. It is made of gauze. It can bind the limbs, tail, head, chest and abdomen. Although it is rarely seen in real life, it is often used in hospitals because there are more patients in hospitals, There are also many trauma patients who will be bandaged after treatment. Another situation is that patients who need surgery also need to be bandaged. Therefore, the use of absorbent gauze bandages in hospitals is very large. The purpose of using absorbent gauze bandages is to prevent the wound from contacting the outside air to prevent wound infection. The skim gauze bandage can be said to be an indispensable medical appliance for dressing, and it also brings a lot of convenience to patients. Some patients with large wounds should pay attention to the problem that if the bandage is not well dressed, the bacteria in the air may cause infection of the wound if they come into contact with the outside air. Although some traditional bandages have good isolation effects, However, many people ignore the problem of air permeability. If the air permeability is not good, the wound may fester or become inflamed. The absorbent gauze bandage is a good solution to the problem of air permeability, which is also the advantage of the absorbent gauze bandage. It can isolate the wound from the outside world and also solve the problem of air permeability, Therefore, the absorbent gauze bandage is highly praised and recognized by users.
Supplied by Jinjiang isolation clothing manufacturer
To transport patients with spinal injury, medical transfer pads should be used like this! For many medical staff, how to transfer seriously ill patients easily, quickly and safely in the process of medical treatment and nursing is undoubtedly a problem that puzzles them. Especially for spinal patients, once the transfer is not in place, it is very likely to aggravate the patient's condition and enhance the patient's pain, The emergence and use of disposable medical transfer pads have solved this problem very well.
