Miyun medical isolation shoe sets wholesale price
The "formula" of medical transfer pad has been widely exposed. There are so many kinds of raw materials: as long as it is a medical product, there are many stresses on the use of raw materials, even the medical transfer pad, a simple medical product, is no exception. Since medical transfer pads are usually used to transfer patients, there are very strict standards for the use of raw materials. At present, the materials commonly used in the production of medical transfer pads are PVC, polyurethane PU, ordinary silica gel, etc. Let's briefly understand the characteristics of different materials. The commonly used raw materials in the production of medical transfer pads are generally as follows: silica gel - alias: silicone rubber, transparent or milky white granular solid. It has open porous structure, strong adsorption, and can adsorb a variety of substances. If water is absorbed, the moisture absorption is about 40%. If cobalt chloride is added, it will be blue when dry and red after absorbing water. PVC is mainly composed of PVC powder, and other ingredients are added to enhance its heat resistance, toughness, ductility, etc. Alcohol and concentrated sulfuric acid are mixed 1:3 at 170 ℃ to produce ethylene chloride and ethylene, which will produce ethylene dichloride; Dichloroethylene can also be converted into chlorinated vinyl, which is the basic component of PVC. During polymerization, chlorinated vinyl molecules are linked together to form a PVC chain. The transfer pad made of this material is characterized by light weight, heat insulation, heat preservation, moisture-proof, flame retardancy, strong bending strength and impact toughness, and high elongation when broken. PU polyurethane is a common polymer material. Polyurethane is a new organic polymer material, which is widely used in many fields of national economy because of its properties. The product transfer pad made of PU material is mainly used in light industry, chemical industry, electronics, textile, medical treatment, construction, building materials, automobiles, etc. The casting polyurethane in polyurethane elastomer is used to produce anti-skid pads. The elastomer is a kind of polyurethane elastomer that is widely used and has a large output. The specific applications include printing and conveying rubber rollers; Molding cots; Oil seal, washer ball joint, bushing bearing; O-ring; Support pad; Sole, back root and toe cap; Lining; Gear, etc. The hardness range of elastomer selected is different in different application fields. The advantage of the transfer pad is its strong viscosity and adhesion. [For details, please refer to the relevant content of "Don't underestimate the mobile sliding pad component, its function is beyond your imagination!"] The above is a brief introduction to the characteristics of commonly used raw materials for the transfer pad. Our company specializes in producing all kinds of transfer pad products with reliable quality and excellent use effect. If relevant enterprises have the need to purchase this product by order, please call our hotline directly for consultation, and we will wholeheartedly provide services.
Miyun medical isolation shoe sets wholesale price
The medical isolation shoe cover has the following advantages: 1. It has good isolation. The upper of the invention wraps all the socks and trouser legs of the medical staff, achieving the function of sealing and isolation. The sole of the shoe is waterproof cloth, which has good waterproof effect, and prevents the water stains on the ground from soaking the shoes, socks, trouser legs, etc. through the shoe cover to cause pollution. 2. The waterproof cloth sole of the invention has the properties of corrosion resistance, tear resistance and peeling resistance, is not easy to wear, and is very practical in clinical work, which reduces the inconvenience caused by the damage of the shoe cover and affects the work. 3. The vamp of the invention is made of medical non-woven fabric, which has good air permeability and solves the problem of air permeability of plastic film shoe cover. 4. The invention adopts medical non-woven fabric and waterproof fabric materials, and its components are easy to degrade. 5. The invention has reasonable structure, the upper and upper are connected by adhesive materials, and can be disassembled, which is convenient to replace the sole, wrap the trouser legs and put them on and off. Disposable shoe covers can save the trouble of taking off shoes for visitors, and can be widely used in electronic, chemical, dust-free workshops, clean rooms and other high demand environments. Common disposable shoe covers include non-woven shoe covers, CPE shoe covers and plastic shoe covers. Each has its own features, including anti-skid shoe cover, rain proof shoe cover, anti-static shoe cover, etc. Compared with the previous isolation areas and operating rooms in hospitals, the shoe covers made of plastic film are impermeable and easily damaged. The low vamp cannot wrap the socks and trouser legs of medical staff together for isolation, which is easy to bring bacteria on the shoes or trouser legs into the isolation area. The high tube non-woven isolation shoe covers provided by our factory can effectively avoid the above shortcomings. They are not only good in isolation, waterproof and breathable, but also high in strength. The high tube design can place shoes and trouser legs in the isolation shoe covers to achieve a more comprehensive isolation effect.
Miyun medical isolation shoe sets wholesale price
The difference between medical cotton swabs and ordinary cotton swabs: we often use medical cotton swabs when we go to the hospital for infusion, injection or treatment. In addition to the special cotton swabs used in hospitals, we can also buy ordinary cotton swabs in supermarkets. What's the difference between these two types of cotton swabs? Here is a brief introduction: First, medical cotton swabs with different materials are made according to the requirements of the pharmaceutical industry standards. It is generally made of medical absorbent cotton and natural birch. Common cotton swabs sold in supermarkets generally use cotton or sponge as raw materials. 2、 Requirements and uses: compared with ordinary cotton swabs, medical cotton swabs have more stringent requirements, must go through the disinfection process, and have no stimulation or harm in direct contact with human body, and have good water absorption. Therefore, it is often used as an auxiliary for wound treatment. Ordinary cotton swabs are more for external use, so they have lower requirements and costs. 3、 Different storage conditions: in addition to the above two differences, their storage conditions are also different. Medical cotton swabs are generally sealed separately and need to be kept in a dry, well ventilated room without corrosive articles; The ordinary cotton swabs should also be kept sealed to avoid dust.
Miyun medical isolation shoe sets wholesale price
What is medical isolation clothing? At present, there is no standard or industry standard for medical isolation clothing. The American standard ASTM F3352-19 [1] defines medical isolation clothing as protective clothing (clothing) used to protect medical staff, visitors and patients from microbial and body fluid transfer in the case of patient isolation. Medical gowns can also be used to protect visitors in the medical environment. According to the isolation and prevention guidelines of the Centers for Disease Control and Prevention, during surgery and patient care activities, when expected to contact clothes, blood, body fluids, secretions and excreta, wear medical isolation clothing to protect the arms of medical staff and exposed body areas. Medical gowns are widely used in intensive care units (ICU), infectious diseases departments and infectious disease hospitals in general hospitals. At present, there are disposable and non disposable medical gowns in clinical use. Disposable medical isolation clothing is expensive, and a large amount of use will cause great waste. There are many problems with non disposable medical isolation clothing: collar, cuff and abdomen are easy to be polluted, which reduces the use time of medical isolation clothing; The design of cuff, back and bottom is defective, which is easy to pollute the working clothes of staff; The fabrication material is not waterproof. Studies have shown that there are many factors that cause hospital infection, among which the way of direct contact infection is that medical staff and caregivers spread pathogenic microorganisms or infectious substances planted by themselves to patients through contact to cause infection, while medical staff wearing medical isolation clothing can effectively prevent and control the occurrence of hospital infection.
Miyun medical isolation shoe sets wholesale price
What are the differences between isolation clothing and protective clothing? (1) Different definitions: isolation clothing is a protective equipment used by medical personnel to protect patients from infection when contacting with blood, body fluids and other infectious substances. Protective clothing: disposable protective articles worn by medical staff in clinical contact with patients with Class A infectious diseases or infectious diseases managed as Class A infectious diseases. (2) Different uses: isolation clothing is used in isolation areas, that is, in hospitals, and protective clothing is used in CDC. (3) There are also differences for patients: wearing isolation clothing: contacting patients with infectious diseases transmitted by contact, such as infectious disease patients and patients infected with multidrug resistant bacteria; Protective isolation shall be carried out for patients, such as patients with extensive burns and patients with bone graft; Prevent infection when patients' blood, body fluids, secretions and effluents splash. In a word, isolation clothing is used for close isolation, contact isolation and protective isolation of patients. Wear protective clothing: when contacting patients with infectious diseases transmitted by air and droplets, they may be splashed by patients' blood, body fluids, secretions, and emissions. But this kind of patient is not very serious, just a general infection. (4) Different materials: protective clothing is disposable, but isolation clothing is not.
