Fujian Medical Isolating Shoe Cover Origin Source Company
Technical requirements for nursing pad sheet: 1 - Product model/specification and its classification description 1.1 Medical nursing pads are divided into I type non-woven fabric, II type non-woven fabric plus plastic film, III type toilet paper plus plastic film, and IV type non-woven fabric and plastic film with toilet paper sandwiched between them for sewing or pressing thickening and water absorption. 1.2 Medical nursing pads can be divided into: Type A: maternity pad; Type B: medium order; Type C: bed sheet; Type D: hole towel; Type E: quilt cover; Type F: pillowcase. Specification and model of medical nursing pad Unit: cm2 Performance index 2.1 See Table 1 for the specification and model of medical nursing pad. 2.2 The appearance of the medical care pad shall be flat without obvious defects, stains, damages, abnormal smell and foreign matters. 2.3 The sewing or heat sealing medical care pad shall be firmly sewn, and shall not be disconnected or skipped. The sewing thread density shall not be less than 8 stitches/3cm, and the sewing edge distance shall not be less than 0.3cm. In case of heat sealing, it shall be firm without cracking. 2.4 Tightness plus film medical care pad, the film part shall not be permeable. 2.5 The medical care pad shall meet the health standards, with the total bacterial count ≤ 200 cfu/g, the total fungal count ≤ 100 cfu/g, coliform bacteria shall not be detected, and pathogenic pyogenic bacteria shall not be detected. 3 Test method 3.1 The basic dimensions measured with ordinary tape or steel ruler shall meet the requirements of 2.1. 3.2 Appearance, hand feeling and visual sensory inspection shall meet the requirements of 2.2. 3.3 The measurement with steel ruler for sewing shall comply with the provisions of 2.3. 3.4 Pour water on the pressed suture and the coating part. After 1 minute, there is no water mark on the reverse side. Put the sealed small package at the bottom of the container with the water height of 0.5 m, and slowly move it up to the water surface for a moment. Whether there is blister should comply with the provisions of 2.4. 3.5 Hygienic requirements shall be inspected according to the hygienic standards for disposable sanitary articles, and the results shall meet the provisions of Article 2.5.
Fujian Medical Isolating Shoe Cover Origin Source Company
Common problems of medical cotton balls: 1. When using cotton balls to reduce fever physically, pay attention to: the simple, reasonable and safe cooling method for patients with high fever is the physical method of reducing fever by wiping with 25% - 50% alcohol. After wetting with cotton balls, scrub the head and neck, limbs, back, hands and feet of the patient. Especially in the key areas to scrub the rich and colorful capillaries, such as armpit, elbow joint, armpit, groin, etc. Note that alcohol is not suitable for urticaria and other eruptive diseases. During the whole process of using alcohol cotton balls, prevent the secondary pollution caused by tweezers, cotton balls, cotton towels, etc. 2. The alcohol concentration value should be appropriate: after continuous experiments, we know that alcohol with a concentration of 75% has strong sterilization ability, so medical disinfection alcohol generally contains 75% pure alcohol and 25% water. The concentration value of alcohol is very critical. If it is too high or too low, it will weaken or even lose the disinfection and sterilization efficiency. Therefore, countermeasures must be selected to maintain the initial concentration value. Alcohol is easy to volatilize and cause the concentration value to decrease, so it should be stored in a very airtight container. This kind of situation often occurs: the cotton balls on the top of the utensils have been made for a long time, but some cotton balls on the bottom are still wet. Some people think that the wet part is alcohol. In fact, it is basically water, so it can no longer be used for disinfection and sterilization. 3. Don't use too much alcohol cotton balls: please don't use too much alcohol cotton balls in your daily life. The alcohol key has certain limitations on the practical application effect and efficacy time of common bacteria, so it is not necessary to blindly follow the trend of exaggerating the efficacy of alcohol sterilization. For example, for the cleaning of small toys, 84 disinfectant with effective chlorine must be used. Simply scrubbing with alcohol cotton balls will not have all practical effects; For the cleaning of tableware, the method of boiling at high temperature is more reasonable. 4. Special attention to the storage standard: when it is not suitable for cotton balls, it should be kept in a closed manner, stored in a dry and clean place, and placed in an area out of the baby's reach to prevent the baby from taking off the cotton balls and swallowing them by mistake.
Fujian Medical Isolating Shoe Cover Origin Source Company
What are the differences between isolation clothing and surgical clothing: 1. Use 1. Isolation clothing ① is used for medical personnel to avoid being polluted by blood, body fluids, and other infectious substances in contact; ② Protective articles used to protect patients from infection; ③ The isolation clothing is a two-way isolation, which can prevent medical staff from being infected or contaminated and prevent patients from being infected. 2. Operating clothes ① play a two-way protective role during the operation; ② Operating clothes establish a barrier between patients and medical staff, reducing the probability of medical staff contacting potential infection sources such as patients' blood or other body fluids during surgery; ③ Operating clothes can prevent the spread of various bacteria adhering to the skin or clothing surface of medical staff to surgical patients. 2、 Dressing indications: 1. Isolation clothing ① when contacting patients with infectious diseases transmitted by contact, such as patients infected with multidrug resistant bacteria; ② Protective isolation of patients, such as diagnosis, treatment and nursing of patients with extensive burns and bone transplantation; ③ It may be splashed by the patient's blood, body fluids, secretions and excretions; ④ Whether it is necessary to wear isolation clothing when entering the important departments, such as ICU, NICU, protective wards, etc., should be determined according to the purpose of medical personnel and the contact with patients. 2. Operating clothes ① are strictly sterilized and used for invasive treatment of patients in special operating rooms.
Fujian Medical Isolating Shoe Cover Origin Source Company
Features of medical isolation shoe cover: product advantages: it has a good barrier function against dry powder dust, suspension and light splash liquid. The wear-resistant fabric is characterized by high strength, good elasticity, durability, strong tear resistance and comfortable wearing. No lamination or film is required, and the particles visible under the microscope can still be blocked after wear. There is a closure design, and the ankle joint has a strap tightening design to ensure the tightness with the legs to prevent exposure and prevent liquid splashing. Way of application: It can be used to prevent contact with potentially infectious patients' blood, body fluids, secretions, etc. for blocking and protection. It can be used for general isolation in outpatient, ward, laboratory and laboratory of medical institutions. It can be used in dustproof workshops and other places that need cleaning. The disposable medical isolation shoe covers are made of high-quality non-woven fabrics by cutting and sewing. There are blue strips, which have sufficient strength and barrier performance. They are not provided sterile and are disposable. Intended use: It is used by medical staff in the medical structure to prevent contact with potentially infectious patients' blood, body fluids, secretions, etc., playing a barrier and protective role. Advantages of medical isolation shoe covers: in the past, the hospital isolation area and operating room used plastic film shoe covers, which were airtight and easily damaged. The low vamp could not separate the socks and trouser legs of the medical staff together, and it was easy to bring bacteria on the shoes or trouser legs into the isolation area. The medical isolation shoe cover can effectively avoid the above shortcomings. It is not only good in isolation, waterproof and breathable, but also high in strength. The high barrel design can place shoes and trouser legs in the isolation shoe cover, which can achieve a more comprehensive isolation effect.
