Which brand is good for Putian absorbent gauze bandage
Appearance of medical isolation shoe cover: 1. The medical isolation shoe cover should be free of mold, and the surface should be free of impurities, adhesion, cracks, damage and other defects; 2. If the medical isolation shoe covers are sewn, the sewn parts should be firm, neatly formed, the needle size should be even and straight, and there should be no defects such as needle skipping and missing stitches. If the heat seal is applied, the heat seal parts should be firm, neatly formed, flat and free of cracks; 3. The sewing needle distance shall not be less than 6 stitches every 40mm. 4. Specification and size: the specification and size of the medical isolation shoe cover should conform to the size of the packaging bag logo, with a tolerance of ± 10%; 5. Surface moisture resistance: the water level on the outer side of the medical isolation shoe cover shall not be lower than the requirement of Level 2. 6. The breaking strength of type II medical isolation shoe cover shall not be less than 10N in longitudinal direction and 4N in transverse direction. 7 Elongation at break The elongation at break of type I medical isolation shoe cover material shall not be less than 10%. 8. Tensile strength Type I medical isolation shoe cover material tensile strength (longitudinal and transverse) shall not be less than 10Mpa. 9. Elastic belt performance The elongation ratio of elastic belt used for medical isolation shoe covers should be ≤ 1:1.7, and the tensile elastic recovery rate should be ≥ 75%. 10. Quality requirements: The weight of nonwoven cloth used in type II medical isolation shoe covers shall not be less than 15g/m2; The film thickness of type I medical isolation shoe cover shall not be less than 0.01mm.
Which brand is good for Putian absorbent gauze bandage
Common problems of medical cotton balls: 1. When using cotton balls to reduce fever physically, pay attention to: the simple, reasonable and safe cooling method for patients with high fever is the physical method of reducing fever by wiping with 25% - 50% alcohol. After wetting with cotton balls, scrub the head and neck, limbs, back, hands and feet of the patient. Especially in the key areas to scrub the rich and colorful capillaries, such as armpit, elbow joint, armpit, groin, etc. Note that alcohol is not suitable for urticaria and other eruptive diseases. During the whole process of using alcohol cotton balls, prevent the secondary pollution caused by tweezers, cotton balls, cotton towels, etc. 2. The alcohol concentration value should be appropriate: after continuous experiments, we know that alcohol with a concentration of 75% has strong sterilization ability, so medical disinfection alcohol generally contains 75% pure alcohol and 25% water. The concentration value of alcohol is very critical. If it is too high or too low, it will weaken or even lose the disinfection and sterilization efficiency. Therefore, countermeasures must be selected to maintain the initial concentration value. Alcohol is easy to volatilize and cause the concentration value to decrease, so it should be stored in a very airtight container. This kind of situation often occurs: the cotton balls on the top of the utensils have been made for a long time, but some cotton balls on the bottom are still wet. Some people think that the wet part is alcohol. In fact, it is basically water, so it can no longer be used for disinfection and sterilization. 3. Don't use too much alcohol cotton balls: please don't use too much alcohol cotton balls in your daily life. The alcohol key has certain limitations on the practical application effect and efficacy time of common bacteria, so it is not necessary to blindly follow the trend of exaggerating the efficacy of alcohol sterilization. For example, for the cleaning of small toys, 84 disinfectant with effective chlorine must be used. Simply scrubbing with alcohol cotton balls will not have all practical effects; For the cleaning of tableware, the method of boiling at high temperature is more reasonable. 4. Special attention to the storage standard: when it is not suitable for cotton balls, it should be kept in a closed manner, stored in a dry and clean place, and placed in an area out of the baby's reach to prevent the baby from taking off the cotton balls and swallowing them by mistake.
Which brand is good for Putian absorbent gauze bandage
Working principle of disposable medical transfer pad: the disposable medical transfer pad uses the sliding property between two different special materials to form the effect similar to the transmission belt under the push of external force. The patient is passed over the bed as if on a transmission belt, making it easy to cross the bed that was time-consuming and labor-intensive. The sliding pad can be used in combination with the disposable middle sheet (bed sheet), which can save more effort, and pass the patient through the bed as a whole to reduce the secondary loss, especially suitable for patients with fracture, obesity, and anesthesia. [For details, please refer to the relevant contents of User's Instructions: Procedures for Use of Disposable Medical Sliding Pads]
Which brand is good for Putian absorbent gauze bandage
Usage of medical isolation shoe cover: ① Please select and confirm the size of medical isolation shoe cover before use. ② Tear off the package at the opening and take out the product. ③ The medical isolation shoe cover has reasonable structure and is easy to wear and take off. Precautions: ① Please read the instructions of medical isolation shoe covers carefully before use. ② Please strictly follow the use and use restrictions of medical isolation shoe covers. ③ The medical isolation shoe cover is disposable, and it is strictly prohibited to reuse. After use, please dispose according to the requirements of the Biosafety Prevention Regulations. ④ This product is melted at 135 ℃, please keep away from heat source and open flame when using. ⑤ Please check the product visually before wearing it. If there is damage, discoloration, pollution, etc., please do not wear it. ⑥ It shall not be used after the expiration date of the product. ⑦ Only for health units and emergency rescue, not for operating rooms!
Which brand is good for Putian absorbent gauze bandage
Advantages and uses of medical isolation shoe covers: The advantages of medical isolation shoe covers are that they can be used in the isolation area of the hospital and the operating room, which are made of plastic film. They are impermeable and easy to break. The low vamp cannot wrap the socks and trouser legs of medical personnel together for isolation, and it is easy to bring bacteria on the shoes or trouser legs into the isolation area. The high tube non-woven isolation shoe cover provided by Rizhao Haixu Pharmaceutical Co., Ltd. can effectively avoid the above shortcomings. It is not only good in isolation, waterproof and breathable, but also high in strength. The high tube design can place shoes and trouser legs in the isolation shoe cover, achieving a more comprehensive isolation effect. Use of medical isolation shoe covers: medical personnel use them in medical structures to prevent contact with potentially infectious patients' blood, body fluids, secretions, etc., and play a barrier and protective role. Use method and effect of medical isolation shoe cover: spread the isolation shoe cover before use, put on the shoe cover, insert socks and trouser legs into the isolation shoe cover, and fix it with straps. After many people, disposable non-woven isolation shoe covers are wear-resistant, waterproof, breathable, and isolation type - good, and the high tube shoe covers do not slide. The use of medical isolation shoe covers not only has good isolation, which can wrap all the socks and trouser legs of medical personnel to achieve the function of sealing and isolation, but also has a waterproof effect -- good, wear-resistant, corrosion resistance, tear resistance, peel resistance, not easy to wear, good ventilation, which solves the problem of impermeability of plastic film shoe covers.
